Shirt screen printing process manually

Shirt screen printing process manually

In previous articles we have discussed what tools and materials are always in the process of manual screen printing t-shirts . Also we have learned how to design an image using Photoshop applications , CorelDraw , Freehand or any other application that you know . And now see how the screen printing process . ok , now convection depok (konveksi depok) will provide manual screen printing stages.

Prepare the following tools

screen printing

chemical light

Hardener ( hardener screen )

The results of the print image ( remember the color should be black )

Screen printing table or board and given a glue table

Rakel

cooking oil

Water spray ( bird spray )

Chemical / Paint and Ink / Pigment Colour

table lamp

Prime card / atm former

Shirt " If you want to know the type of shirt can in " Type of Material Shirt "

Mix a mild chemical emulsion and sensitizernya bowl then stir . Then apply the front and back of the screen using the former prime thin card , as shown below so that spread to the surface and wait until slightly dry .

If the display surface looks dry, apply a screen front surface with cooking oil and place the print paper , broom with prime cards to print paper attached to the screen . Then put it as a sequence of images below . Turn on the lamp table and wait for 7-10 minutes in a dark room .

If it is about 7-10 minutes , remove the screen and then flush with the first pour water all over the screen so that the oil is gone. Then spray the screen with water spray ( spray birds ) so that the area of ​​the screen that contains the image can be perforated .. Then dry in the sun and wait for it to dry , if it is dry apply a hardener on the screen ( screen hardener ) .

Now make a paste by mixing paint and ink in a bowl and mix well , you have to adjust the dose to get the desired color . " learn the types of screen printing inks and techniques "

Put plywood into a shirt that had been smeared with glue table , use plywood so that the results obtained during the sweep and paint evenly can be filtered properly .

Put the screen above the shirt then pour the pasta above screen

Pull pasta using Rakel so pasta can descend through a small hole screen object clothes , then dry the paint in dress shirt using a hair dryer and repeat 2-3 times to get a good result .

After sweeping finished dry under the scorching sun or when having press machine , press machine used for maximum results .

#hope it is useful